Metal to wood Features

  • #10 Diameter is designed to attach standing seam roof clips to plywood, OSB, or wood purlins.
  • Low profile head design provides excellent pull over strength.
  • Thin Wafer Head is designed for standing seam panels that utilize no clip but require a very thin head so as to not to dimple the roof panel.
  • Available in Ruspert® corrosion resistant coated carbon steel or 304 stainless steel

 

Check Out the Metal to Metal ST® ClipScrew Fastener

SIZEHEAD STYLECARTON QTY.WEIGHT/M
10 x 1” PANCAKE TYPE 17#2 SQUARE/PHILLIPS COMBO30007
10 x 1-1/2” PANCAKE TYPE 17#2 SQUARE/PHILLIPS COMBO25009
10 x 1” PANCAKE TYPE 17#2 SQUARE DRIVE HEAD30007
10 x 1-1/2” PANCAKE TYPE 17#2 SQUARE DRIVE HEAD25009
10 x 2” PANCAKE TYPE 17#2 SQUARE DRIVE HEAD200010.2
10 x 1” WAFER SHARP POINT#2 SQUARE/PHILLIPS COMBO30005
10 x 1-1/2” WAFER SHARP POINT#2 SQUARE/PHILLIPS COMBO25007
10 x 2” WAFER SHARP POINT#2 SQUARE/PHILLIPS COMBO20009
10 x 1” 304 SS SHARP POINT #2 SQUARE/PHILLIPS COMBO30007
10 x 1-1/2” 304 SS SHARP POINT#2 SQUARE/PHILLIPS COMBO25009

 

 #10 PANCAKE TYPE 17#10 WAFER#10 PANCAKE 304 SS
HEAD STYLE#2 SQUARE/PHILLIPS Combo #2 SQUARE DRIVE HEAD#2 SQUARE/PHILLIPS Combo
DRILL POINT30 TYPE 1730 SHARP PT30 SHARP PT
MAJOR DIAMETER.204/.198.204/.198.194/.188
MINOR DIAMETER.128/.122.128/.122.133/.126
HEAD DIAMETER.447/.423.447/.423.440 NOM.
ULT. TENSILE STRENGTH1981 LBS.1981 LBS.1450 LBS.
MIN. TORSIONAL STRENGTH 66 IN-LBS 66 IN-LBS48 IN-LBS
NOM. SHEAR STRENGTH 1428 LBS.1428 LBS.1113 LBS.
SUBSTRATEPENETRATIONVALUE
#10 PANCAKE T-17 3/4 PLYFULL684
#10 WAFER 3/4 PLYFULL684
#10 PANCAKE 304 SS 3/4 PLYFULL544
#10 PANCAKE T-17 5/8 PLYFULL435
#10 WAFER 5/8 PLYFULL435
#10 PANCAKE 304 SS 5/8 PLYFULL424
#10 PANCAKE T-17 1/2 PLYFULL352
#10 WAFER 1/2 PLYFULL352
#10 PANCAKE 304 SS 1/2 PLYFULL335
#10 PANCAKE T-17 7/16” OSBFULL218
#10 WAFER 7/16” OSBFULL218
#10 PANCAKE 304 SS 7/16” OSBFULL182
#10 PANCAKE T-17 2X Y.PINE1”868
#10 WAFER 2X Y.PINE1”868
#10 PANCAKE 304 SS 2X Y.PINE1”779
#10 PANCAKE T-17 2X SPF1”597
#10 WAFER 2X SPF1”597
#10 PANCAKE 304 SS 2X SPF1”719
SUBSTRATEGAUGETHICKNESSVALUE
#10 PANCAKE T-17 3/4 PLY290.014529
#10 PANCAKE 304 SS 3/4 PLY290.014529
#10 PANCAKE T-17 3/4 PLY260.018779
#10 PANCAKE 304 SS 3/4 PLY260.018779
#10 PANCAKE T-17 3/4 PLY240.0241128
#10 PANCAKE 304 SS 3/4 PLY240.0241128
#10 PANCAKE T-17 3/4 PLY220.031512
#10 PANCAKE 304 SS 3/4 PLY220.031512
#10 WAFER 3/4 PLY290.014685
Thin Wafer Head can be used for non-clip applications. Pancake Head is best suited for roof clip applications.

Thin Wafer Head can be used for non-clip applications. Pancake Head is best suitedfor roof clip applications.

2 driver bits to choose from.

2 driver bits to choose from.

Type A point & thread design maximizes holding strength in plywood, OSB, & wood purlins.

Type A point & thread design maximizes holding strength inplywood, OSB, & wood purlins.

typical-app

app-1

Share This

Share this post with your friends!