INSTALLATION RECOMMENDATION

MAXX STEELBINDER (Cupped Head Sealers) &
HWH STEELBINDER Sealers & KWIKSEAL MB WOODBINDER

FOR PROPER APPLICATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED ON ANY PAINTED FASTENER

1. Select the proper screw gun for installing self drilling fasteners.
 MAXX STEELBINDER
  HWH STEELBINDER & KWIKSEAL II WOODBINDER
  
MANUFACTURER
MILWAUKEE6790-206.5
0-2500
6790-20
6.50-2500
DEWALTDW2666.50-2000
DW2666.50-2500
BOSCHSG25MT7.00-2500
SG25MT
7.00-2500
2. Set the magnet in the driving socket to the proper depth. Socket must bear securely on the hex washer face of the fastener.
correct-incorrect
3. Use depth sensing nosepiece on screw gun to allow proper seating of fastener.Do not overdrive. (See illustration.)
MAXX STEELBINDER HWH STEELBINDER & KWIKSEAL II WOODBINDER
CORRECT
Sealing material slightly visible at edge
of metal washer. Assembly is weather tight.
UNDERDRIVEN
Sealing material not compressed,
Assembly losse.
OVERDRIVEN
Sealing material extruded beyond edge of washer. Washer deformed.
4. Drive fastener perpendicular to surface.
MAXX STEELBINDER HWH STEELBINDER & KWIKSEAL II WOODBINDER 
CORRECTINCORRECTCORRECTINCORRECT
5. Select extension cords with the correct wire size. See table below.
RECOMMENDED MINIMUM WIRE GAUGE* FOR EXTENSION CORDS
RATED AMPERERS (TOOL)  EXTENSION CORD LENGTH   
25'50'75'100'150'200'
Through 5161616141212
5.1 - 8.01616141210-
8.1 - 12.014141210--
12.1 - 15.012121010--
6. Do not force the fasteners. Apply only enough end pressure to allow drill point to cut efficiently.

Share This

Share this post with your friends!