Menu

Built Strong Through Innovation

woodbinder-ss-brand-green

  • Lifetime 40 Year Warranty Long Life Fastener.
  • 304 Stainless Steel cupped head & washer provide lifetime protection in the harshest environments. You may obtain a free copy of the written warranty upon request.
  • 304 SS Woodbinder is an excellent choice for use in animal confinement applications or for aluminum liner panel applications.
  • 304 SS Woodbinder is an economical alternative to Woodbinder ACQ.
  • Type A point necessitates a pre-drilled hole in steel, but not aluminum.

FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.
CHECK WITH ALUMINUM SUPPLIER FOR COMPATIBILITY WHEN USED IN COASTAL OR MARINE APPLICATIONS


See Technical Information
Click Here

Check out other Stainless Steel Fastening System Fasteners


SSGHead

board-certified-BUG
architecturalBug
40 year warranty lifetime


SIZE CARTON QTY. WEIGHT/M
10 x 1” 3000 9.0
10 x 1 1/2” 2500 11.9
10 x 2” 2000 14.0
  SS
HEAD STYLE 1/4” CHWH
POINT DIAMETER 30º Sharp Point T-A
MAJOR DIAMETER .183/.189
MINOR DIAMETER .126/.132
WASHER FACE DIAMETER .500
HEAD ACROSS FLATS NOM .250"
ULT. TENSILE STRENGTH 1135 LBS.
MIN. TORSIONAL STRENGTH 48 IN-LBS.
NOM. SHEAR STRENGTH 1034 LBS.
SUBSTRATE PENETRATION VALUE
3/4” PLY FULL 616
5/8” PLY FULL 473
1/2” PLY FULL 312
7/16” OSB FULL 208
2 X Y. PINE* 1” 802
2 X Y. PINE* 1 1/2" 1176
2 X SPF* 1 678
2 X SPF* 1 1/2" 913

* Y.PINE (Yellow Pine) * SPF (Spruce Pine Fir)

SUBSTRATE GAUGE THICKNESS VALUE
304 SS Type A (EPDM) 29 .014 683
304 SS Type A (EPDM) 26 .018 870

Pull over values are calculated with a EPDM rubber washer assembled to cupped head screw with a .500” washer face.

ss-app-close-up
ss-app-1
woodbinder-ss-mb-callouts-web
The Type A point will tap a predrilled hole in steel but will self-drill through aluminum liner panels.

The Type A point will tap a predrilled hole in steel but will self-drill through aluminum liner panels.


Notes:

  1. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.


Go to Top of Page
Click Here