Menu

Built Strong Through Innovation

SteelbinderHeavyGaugeBrandBlue

  • Fastener lengths over 1-1/4″ are designed to penetrate steel thickness up to .500.
  • Thread to point ratio engineered to provide maximum pullout strength in heavy gauge steel.
  • EPDM rubber is vulcanized to steel washer. Moisture has no place to penetrate. The washer provides a secure seal even when driven at an angle.
  • Applications include metal deck to structural steel or bar joists, & retrofit clips to structural steel.
  • Fastener is also available without a bonded sealing washer.

FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.


See Technical Information
Click Here

Check out other HEAVY GAUGE Fasteners



SB HG


board-certified-BUG
architecturalBug


SIZE CARTON QTY. WEIGHT/M
12-24 x 1-1/4” 2500 12.6
12-24 x 1-1/2” 2000 16.2
12-24 x 2” 1500 22.1

Lengths longer than 2 inches are available but non-standard. Call for price and availability.

  HG
HEAD STYLE HWH
DRILL POINT .199/.195
MAJOR DIAMETER .215/.209
MINOR DIAMETER .164 REF.
WASHER FACE DIAMETER .432/.398
HEAD ACROSS FLATS NOM .312"
ULT. TENSILE STRENGTH 2803 LBS.
MIN. TORSIONAL STRENGTH 100 IN-LBS.
NOM. SHEAR STRENGTH 1999 LBS
SUBSTRATE GAUGE THICKNESS VALUE
HRS PRIMED ONLY 14 .075 924
HRS PRIMED ONLY 12 .105 1627
HRS PLATE 3/16" .187 2556
HRS PLATE 1/4" .250 3298
SUBSTRATE GAUGE THICKNESS VALUE
AZ55 Galvalume BONDED WASHER (14mm O.D.) 26 .018 801
AZ55 Galvalume BONDED WASHER (14mm O.D.) 24 .024 996
AZ55 Galvalume BONDED WASHER (14mm O.D.) 22 .030 1258
AZ55 Galvalume (.398/.432 HWH DIA.) 26 .018 775
AZ55 Galvalume (.398/.432 HWH DIA.) 24 .024 956
AZ55 Galvalume (.398/.432 HWH DIA.) 22 .030 1078
SB HG App Color Web
SB HG Close Up Color Web
HWH with EPDM bonded washer provides a secure seal to prevent leaks.

HWH with EPDM bonded washer provides a secure seal to prevent leaks.

Long Drill point assures proper clearance of heavy gauge metal before any thread engagement begins

Sharp drill point & long flute length assures proper clearance of heavy gauge metal before any thread engagement begins.

Notes:

  1. HRS (Hot Rolled Steel)
  2. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.


Go to Top of Page
Click Here