Features

TACKY TAPE is a 100% solids, asbestos free butyl tape sealant in roll form.
Applications include metal roof endlaps, sidelaps, vents, gutters, pipe flashings, skylights.
Service temperature range is -40 Degrees F- +180 Degrees F
Material will not become brittle or crack.

Check Out Other SEALANT AND TAPE Products

Property	Typical Values	Test Method
Specific Gravity:	1.47	ASTM D 792
Density:	13.54 Lbs/Gal 1.62 Kg/Liter	ITW PSNA Lab Test
Percent Solids:	100%	ITW PSNA Lab Test
Peel Adhesion PIW (N/mm2) / % Cohesive Separation Galvalume Anodized Aluminum Mill Finish Aluminum Polyvinylidene Fluoride PVC Plastisol Polyester Siliconized Polyester	16 (2.8) / 100 16 (2.8) / 100 16 (2.8) / 100 17 (2.8) / 100 17 (2.8) / 100 16 (2.8) / 100 16 (2.8) / 100	AAMA 800 1/16” (0.158cm) thick
Tensile Adhesive Strength PSI (kPa) % Cohesive Separation	20 (138) 95	ASTM C 907
Yield Strength PSI (kPA)	8 (55)	ASTM C 908
% Elongation	>1000	ASTM C 908
Sag	None	AAMA 800
Vehicle Migration	Pass,<1/8” (<3.175mm)	AAMA 800
Water Resistance	No Effects	AAMA 800
Hardness (Shore 00)	50-60	AAMA 800
Crazing to Acrylic plastics	None	MIL-S-11030C
Cone Penetration (0.1mm) @77°F (25°C) @120°F (48.8°C) @0°F (-17.7°C)	85-100 125-135 45-55	ASTM D 217 300 g cone (5 Sec)
Application Temperature Range	-5°F to 120°F (-20°C to 49°C)	ITW PSNA Lab Test
Service Temperature Range	-40°F to 200°F (-40°C to 93°C)	ITW PSNA Lab Test
Color	Light Gray	Visual ITW PSNA Test
Weatherability QUV, 340A lamp 1000 Hrs	Excellent, no cracking, chalking, wash- off or flow (sag)	ITW PSNA Lab Test
6” Static Water Pressure	Pass – No Leakage	ASTM Proposed Test Method
Water Penetration	Pass – No leakage	ASTM E 1646
Air Leakage At 1.57 PSF At 6.24 PSF	0.051 CFM/FT2 0.068 CFM/FT2 0.1024 CFM/FT2 0.1365 CFM/FT2	ASTM E 1680
Shelf Life	18 months when stored at or below 100°F (38°C)