Features
- Wedge anchor is carbon steel with zinc plating.
- Applications include attaching base angle to concrete as well as other equipment subject to vibration or extreme movement.
- The hole diameter drilled with a carbide masonry bit is equal to the diameter of the anchor installed
- Expansion cone provides full 360 degree contact with the concrete, allowing maximum pull out strength.
NOTES: 1. An appropriate factor of safety must be applied to the above
ultimate values to determine the allowable loads for design purposes.
Check Out Other ANCHOR Products
SIZE | CASE QTY. | CARTON QTY. | WEIGHT/M |
---|---|---|---|
3/8 x 3” | 50 | 200 | 10.8 |
3/8 x 3-3/4” | 50 | 200 | 12.5 |
1/2 x 2-3/4” | 25 | 100 | 19.0 |
1/2 x 3-3/4” | 25 | 100 | 24.4 |
1/2 x 4-1/4” | 25 | 100 | 26.0 |
5/8 x 4-1/2” | 10 | 40 | 22.5 |
5/8 x 6” | 10 | 40 | 59.0 |
3/4 x 5-1/2” | 10 | 40 | 81.0 |
3/4 x 7” | 10 | 40 | 99.0 |
3/4 x 10” | 10 | 20 | 140.0 |
ANCHOR AND HOLE SIZE (INCHES) | EMBEDMENT DEPTH (IN) | TENSION (LBS) | SHEAR (LBS) | EMBEDMENT DEPTH (IN) | TENSION (LBS) | SHEAR (LBS) |
---|---|---|---|---|---|---|
---------------------- 4000 PSI CONCRETE -------------------------- | ---------------------- 6000 PSI CONCRETE -------------------------- | |||||
1/4” | 1-1/4” 2-1/2” | 2000 2600 | 2811 2811 | 1-1/4” 2-1/2” | 2042 2826 | 2811 2811 |
3/8” | 1-3/4” 5-5/8” | 3850 6020 | 3075 4227 | 1-3/4” 5-5/8” | 4790 6635 | 3075 4227 |
1/2” | 2-1/8” 6-1/4” | 6324 8249 | 6260 7516 | 2-1/8” 6-1/4” | 7540 10713 | 6260 7516 |
5/8” | 2-5/8” 6” | 9527 15893 | 9760 11743 | 2-5/8” 6” | 10597 16705 | 9760 11743 |
3/4” | 3-3/4” 7-7/8” | 13130 19795 | 15860 23817 | 3-3/4” 7-7/8” | 18979 24145 | 15860 23817 |
7/8” | 4” 8” | 18591 27484 | 24000 25710 | 4” 8” | 19945 33113 | 24000 25710 |
1” | 5” 9” | 26676 36171 | 32494 36896 | 5” 9” | 30683 36171 | 32494 36896 |
1-1/4” | 5-5/8” 10” | 28733 50390 | 46976 46975 | 5-5/8” 10” | 28733 50390 | 46975 46975 |
