ST Architectural Series ST Architectural Series

Features

  • Manufactured from EPDM or silicone rubber, Retrofit Roofjack™ SQ is compounded for maximum resistance to ozone, UV light, & temperature extremes.
  • Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.
  • Retrofit Roofjack SQ are used in applications for which a standard flashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.
  • Retrofit Roofjack SQ are used in applications for which a standard flashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.
  • Fastener snaps & cable tie are included.

 

Check Out Other Roofjack Products

RETROFIT
SQUARE BASE
PIPE SIZEBASE
DIMENSION
COLOR MATERIALCARTON
QUANTITY
WEIGHT
PER CARTON
#11/2” - 4” (12.7 - 101.6mm)8” - 3/16” (80.96mm)Black EPDM/Grey EPDM/Red Silicone52.5
#24” - 9-1/4” (101.6 - 135mm)14-1/4” (361.95mm)Black EPDM/Grey EPDM/Red Silicone58.0
#39-1/4” - 16-1/4”(235 - 412.8mm)21-1/2” (546.1mm)Black EPDM/Grey EPDM/Red Silicone515.5
 EPDM 500SILICONE
Advanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphm
High Temperature Resistance
Tested to Intermittent
Continuous
+135ºC (+275ºF)
+100ºC (+212ºF)
+260ºC (+500ºF)
+225ºC (+500ºF)
Low Temperature Resistance tested to…-55ºC (-65ºF)-74ºC (-100ºF)
Tensile Set Maximum…
Compression Set Maximum…
10MPa (1450psi)
25%
5MPa (700psi)
50%
retrofit-roofjack-sq-installation

 retrofit-roofjack-sq-red-silcone

Share This

Share this post with your friends!