Features

Manufactured from EPDM or silicone rubber, Roofjack™ SQ is compounded for maximum resistance to ozone, UV light, & temperature extremes.
Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.
Roofjack SQ are well-marked so they can easily be cut with shears to fit exactly the pipe size used.
Roofjack SQ are available in Black or Gray EPDM & Red Silicone.
Roofjack SQ can be turned so corner is pointing up the roof. It will act as a water diverter.

Check Out Other Roofjack Products

	PIPE SIZE	BASE DIMENSION	COLOR MATERIAL	CARTON QUANTITY	WEIGHT PER CARTON
MINI	1/8”-3/4”	2 - 1/4” (57mm)	Black/Gray EPDM & Red Silicone	15	2.5
#1	1/4”-2-3/4”	4-1/2” (114mm)	Black/Gray EPDM & Red Silicone	15	2.5
#2	7/8”-4”	6” (152mm)	Black/Gray EPDM & Red Silicone	15	4.5
#3	1/4”-5-3/4”	8” (203mm)	Black/Gray EPDM & Red Silicone	15	7.5
#4	2-3/4”-7”	10” (254mm)	Black/Gray EPDM & Red Silicone	10	8.0
#5	4”-8-1/4”	11” (279mm)	Black/Gray EPDM & Red Silicone	10	9.5
#6	4-3/4”-10”	12” (304mm)	Black/Gray EPDM & Red Silicone	10	12.0
#7	5-1/2”-11-1/2”	14” (355mm)	Black/Gray EPDM & Red Silicone	10	15.5
#8	6-3/4”-13-1/2”	17” (431mm)	Black/Gray EPDM & Red Silicone	5	12.8
#9	9-1/2”-20-1/2”	25” (635mm)	Black/Gray EPDM & Red Silicone	5	19.3
MAXI	12”-28-1/2”	34” (863mm)	Black/Gray EPDM & Red Silicone	5	25.6

	EPDM 500	SILICONE
Advanced Ozone Resistance Tested to…	70 hr @500 pphm	70 hr @ 500 pphm
High Temperature Resistance Tested to Intermittent Continuous	+135ºC (+275ºF) +100ºC (+212ºF)	+260ºC (+500ºF) +225ºC (+500ºF)
Low Temperature Resistance tested to…	-55ºC (-65ºF)	-74ºC (-100ºF)
Tensile Set Maximum… Compression Set Maximum…	10MPa (1450psi) 25%	5MPa (700psi) 50%