Extreme™ Roofjack™
#10 Diameter is designed to attach standing seam roof clips to plywood, OSB, or wood purlins.
Low profile head design provides excellent pull over strength.
Thin Wafer Head is designed for standing seam panels that utilize no clip but require a very thin head so as not to dimple the roof panel.
Available in Ruspert® corrosion resistant coated carbon steel or 304 stainless steel.
| PIPE SIZE | BASE WIDTH | COLOR MATERIAL | CARTON QTY. | WEIGHT PER CARTON |
|---|---|---|---|---|
| 1/4″ – 5-3/4″ (6 – 146mm) | 11″ (279mm) | Black EPDM & Red Silicone | 5 | 2.5 |
| EPDM 500 | SILICONE | |
|---|---|---|
| Advanced Ozone Resistance Tested to… | 70 hr @ 500 pphm | 70 hr @ 500 pphm |
| High Temperature Resistance Tested to… Intermittent | +135ºC (+275ºF) | 260ºC (+500ºF) |
| High Temperature Resistance Tested to… Continuous | +100ºC (+212ºF) | +225ºC (+500ºF) |
| Low Temperature Resistance Tested to… | -55ºC (-65ºF) | -74ºC (-100ºF) |
| Tensile Set Maximum… | 10MPa (1450psi) | 5MPa (700psi) |
| Compression Set Maximum… | 25% | 50% |
A square base pipe flashing designed to be customized to the exact pipe diameter as well as hangle extreme pitch (35° – 65° )and conform to any metal roof configuration.
