HG™ SteelBinder®
Fastener lengths over 1-1/4”are designed to penetrate steel thickness up to .500”.
Thread to point ratio engineered to provide maximum pull out strength in heavy gauge steel.
EPDM rubber is vulcanized to steel washer. Moisture has no place to penetrate. The washer provides a secure seal even when driven at an angle.
Applications include metal deck to structural steel or bar joists, & retrofit clips to structural steel.
Fastener is also available without a bonded sealing washer.
| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| 12-24 x 1-1/4″ | HWH | 2500 | 12.6 |
| 12-14 x 1-1/2″ | HWH | 2000 | 16.2 |
| 12-24 x 2″ | HWH | 1500 | 22.1 |
Lengths longer than 2 inches are available but non-standard. Call for price and availability.
| DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|---|
| #12-14 | .199/.195 | .215/.209 | .164 REF | .432/.398 | NOM .312″ | 2803 LBS | 100 IN-LBS. | 1999 LBS |
| MATERIAL | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HRS PRIMED ONLY | AZ55 GALVALUME | G-90 GALVALUME | HRS. PLATE | |||||||||||
| NOM GAUGE | 16 | 14 | 12 | 26 | 24 | 22 | 18 | 20 | 18 | 16 | 14 | 12 | 3/16″ | 1/4″ |
| THICKNESS | .060 | .075 | .105 | .018 | .024 | .030 | .048 | .036 | .048 | .060 | .075 | .105 | .187 | .250 |
| #12-24 | N/A | 924 | 1627 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 2556 | 3298 |
| DESIGNATION | MATERIALS | ||||||
|---|---|---|---|---|---|---|---|
| AZ55 GALVANIZED | G90 | ALUMINUM | SLOT EDGE PANEL | ||||
| NOM. GAUGE | 29 | 26 | 24 | 22 | 20 | 21 | 29 |
| THICKNESS | .014 | .018 | .024 | .030 | .036 | .028 | .014 |
| #12-24 w/ 14 MM Bonded Washer | N/A | 801 | 996 | 1258 | N/A | N/A | N/A |
| .398/.432 HWH DIA | N/A | 775 | 956 | 1078 | N/A | N/A | N/A |
NOTES:
- HRS (Hot Rolled Steel)
- All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.
