Metal To Wood
ST Clip Screws
#10 Diameter is designed to attach standing seam roof clips to plywood, OSB, or wood purlins.
Low profile head design provides excellent pull over strength.
Thin Wafer Head is designed for standing seam panels that utilize no clip but require a very thin head so as not to dimple the roof panel.
Available in Ruspert® corrosion resistant coated carbon steel or 304 stainless steel.
| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| 10 x 1″ Pancake Type 17 | #2 Square/Phillips Combo | 3000 | 7.0 |
| 10 x 1-1/2″ Pancake Type 17 | #2 Square/Phillips Combo | 2500 | 9.0 |
| 10 x 1″ Pancake Type 17 | #2 Square Drive Head | 3000 | 7.0 |
| 10 x 1-1/2″ Pancake Type 17 | #2 Square Drive Head | 2500 | 9.0 |
| 10 x 2″ Pancake Type 17 | #2 Square Drive Head | 2000 | 10.2 |
| 10 x 1″ Wafer Sharp Point | #2 Square/Phillips Combo | 3000 | 5.0 |
| 10 x 1-1/2″ Wafer Sharp Point | #2 Square/Phillips Combo | 2500 | 7.0 |
| 10 x 2″ Wafer Sharp Point | #2 Square/Phillips Combo | 2000 | 9.0 |
| 10 x 1″ 304 SS Sharp Point | #2 Square/Phillips Combo | 3000 | 7.0 |
| 10 x 1-1/2″ 304 SS Sharp Point | #2 Square/Phillips Combo | 2500 | 9.0 |
*Current sizes available with powder coating
| DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|---|
| #10 Pancake Type 17 | 30º T-17 | .204/.198 | .128/.122 | .447/.423 | N/A | 1981 LBS | 66 IN-LBS. | 1428 LBS |
| #10 Wafer | 30º Sharp Point | .204/.198 | .128/.122 | .447/.423 | N/A | 1981 LBS | 66 IN-LBS. | 1428 LBS. |
| #10 Pancake 304 SS | 30º Sharp Point | .194/.188 | .133/.126 | .440 NOM. | N/A | 1450 LBS | 48 IN-LBS. | 1113 LBS. |
| MATERIAL | SUBSTRATE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| HRS PRIMED ONLY | 3/4″ PLY | 5/8″ PLY | 1/2″ PLY | 7/16″ OSB | 2X Y.PINE | 2X SPF | |||||
| NOM. GAUGE | 16 | 14 | 12 | ||||||||
| THICKNESS | .060 | .075 | .105 | (3) | (3) | (3) | (3) | (2) | (1) | (2) | (1) |
| #10 Pancake T-17 | N/A | N/A | N/A | 684 | 435 | 352 | 218 | N/A | 868 | 787 | 597 |
| #10 Wafer | N/A | N/A | N/A | 684 | 435 | 352 | 218 | N/A | 868 | N/A | 597 |
| #10 Pancake 304 SS | N/A | N/A | N/A | 544 | 424 | 335 | 182 | N/A | 779 | N/A | 719 |
| MATERIAL | |||||||
|---|---|---|---|---|---|---|---|
| DESIGNATION | AZ55 GALVALUME | G90 | ALUMINUM | SLOT EDGE PANEL | |||
| NOM. GAUGE | 29 | 26 | 24 | 22 | 20 | 21 | 29 |
| THICKNESS | .014 | .018 | .024 | .030 | .036 | .028 | .014 |
| #10 Pancake T-17 | 529 | 779 | 1128 | 1512 | N/A | N/A | N/A |
| #10 Wafer | N/A | N/A | N/A | N/A | N/A | N/A | 5685 |
| #10 Pancake 304 SS | 529 | 779 | 1128 | 1512 | N/A | N/A | N/A |
Metal to wood fastener with low-profile head designed to attach standing seam roof clips to plywood, OSB, or wood purlins.
ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN LBS. APPLY AN APPROPRIATE SAFETY FACTOR TO OBTAIN DESIGN LIMITS.
