Stainless Steel WoodBinder®
304 Stainless Steel cupped head & washer provide lifetime protection in the harshest environments. You may obtain a free copy of the written warranty upon request.
304 SS™ Woodbinder® is an excellent choice for use in animal confinement applications or for aluminum liner panel applications.
Type A point necessitates a pre-drilled hole in steel, but not aluminum.
| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| 10 x 1″ | 1/4″ CHWH | 3000 | 9.0 |
| 10 x 1-1/2″ | 1/4″ CHWH | 2500 | 11.9 |
| 10 x 2″ | 1/4″ CHWH | 2000 | 14.0 |
*Current sizes available with powder coating
| DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|---|
| #10 | 30º Sharp Point | .183/.189 | .126/.132 | .500 | NOM .250″ | 1135 LBS | 48 IN-LBS. | 1034 LBS |
| SUBSTRATE | (1) – 1″ PENETRATION (2) – 1 1/2″ PENETRATION |
(3) – FULL PENETRATION (4) – 1/2″ PENETRATION |
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MATERIAL | |||||||||||||||||
| HRS PRIMED ONLY | 3/4″ PLY | 5/8″ PLY | 1/2″ PLY | 7/16″ OSB | 2X Y. PINE | 2X SPF | |||||||||||
| NOM.GAUGE | 16 | 14 | 12 | ||||||||||||||
| THICKNESS | .060 | .075 | .105 | (3) | (4) | (3) | (4) | (3) | (4) | (3) | (4) | (1) | (2) | (4) | (1) | (2) | (4) |
| #10 | N/A | N/A | N/A | 616 | N/A | 473 | N/A | 312 | N/A | 208 | N/A | 802 | 1176 | N/A | 676 | 913 | N/A |
| DESIGNATION | MATERIALS | ||||||
|---|---|---|---|---|---|---|---|
| AZ55 GALVANIZED | G90 | ALUMINUM | SLOT EDGE PANEL | ||||
| NOM. GAUGE | 29 | 26 | 24 | 22 | 20 | 21 | 29 |
| THICKNESS | .014 | .018 | .024 | .030 | .036 | .028 | .014 |
| #10 (EPOM WASHER ONLY) | 683 | 870 | N/A | N/A | N/A | N/A | N/A |
Metal to wood fastener constructed of 304 stainless steel designed to provide lifetime protection in harsh environments.
NOTES:
- All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.
CHECK WITH ALUMINUM SUPPLIER FOR COMPATIBILITY WHEN USED IN COASTAL OR MARINE APPLICATIONS
