| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| #12 x 1-1/2″ | HEX | 2500 | 10.1 |
*Current sizes available with powder coating
| DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|---|
| #12 TYPE 17 | Sharp Point | .215/.210 | .130/.135 | .500 | .305/.311 | 1575** LBS | 65 IN-LBS. | 2100 LBS |
| SUBSTRATE | (1) – 3/4″ PENETRATION (2) – 1 1/2″ PENETRATION |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MATERIAL | |||||||||||||||
| HRS PRIMED ONLY | 3/4″ PLY | 5/8″ PLY | 1/2″ PLY | 5/8″ OSB | 7/16″ OSB | 2X SPF | |||||||||
| NOM.GAUGE | 16 | 14 | 12 | ||||||||||||
| THICKNESS | .060 | .075 | .105 | (1) | (2) | (1) | (2) | (1) | (2) | (1) | (2) | (1) | (2) | (1) | (2) |
| #12 TYPE 17 | N/A | N/A | N/A | 380 | 585 | 453 | 588 | 297 | 390 | 361 | 441 | 198 | 212 | 378 | 739 |
| DESIGNATION | MATERIALS | |||
|---|---|---|---|---|
| AZ55 GALVANIZED | ||||
| NOM. GAUGE | 29 | 26 | 24 | 22 |
| THICKNESS | .015 | .019 | .024 | .032 |
| #12 TYPE 17 (EPOM WASHER ONLY) | 658 | 927 | 1035 | 1386 |
Metal to wood fastener designed for OSB and replacement applications.
NOTES:
- 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETING
- 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.
- BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING.
- ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN LBS. APPLY AN APPROPRIATE SAFETY FACTOR TO OBTAIN DESIGN LIMITS.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.
TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY.
DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.
2.5 mil of computer controlled powder coat is applied over zinc plating and chromate sealer.
Unique polyester powder formulation resists harmful UV rays and chemical breakdown.
Automated process ensures a consistent color match from batch to batch.
POWDERFUL is completely free of volatile organic compounds (VOC), and is entirely recyclable.
There are 35 standard colors that match high volume metal panel paint colors.
5/16” Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy, The head is molded. It is not a cap. The molded head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold.
Head and washer face carry a 40 year warranty against red rust.
ZXL is proudly molded in the USA.
Unique threads are designed to fasten metal panels to light density wood product like OSB.
Strip-Loc grips the fibers of the OSB in a way that reduces strip out.
Paired with Type 17 Point the fastener is a cost effective rescue screw for stripped out nails and screw out of OSB.
