Retrofit Roofjack RD™
Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for
maximum resistance to ozone, UV light, & temperature extremes.
Flexible aluminum base will allow the flashing to conform to any metal roof
configuration. Pipe location can be centered in the flat of the panel or the rib.
Urethane sealant & self-drilling screws complete the installation.
RETROFIT Roofjack are well marked so they can easily be cut with shears to
fit exactly the pipe size used.
Stainless steel teeth grip the material & secure it tightly.
| PIPE SIZE | BASE DIAMETER | COLOR MATERIAL | CARTON QTY. | WEIGHT PER CARTON | |
|---|---|---|---|---|---|
| #1 | 3/4″ – 2-3/4″ (19 – 70mm) | 6-3/10″ (160mm) | Black/Gray EPDM & Red Silicone | 5 | 2.5 |
| #2 | 2″ – 7-1/4″ (50.8 – 184mm) | 10-3/4″ (273.1mm) | Black/Gray EPDM & Red Silicone | 5 | 8.0 |
| #3 | 3-1/4″ – 10″ (95 – 254mm) | 14-1/2″ (641.4mm) | Black/Gray EPDM & Red Silicone | 5 | 15.5 |
| EPDM 500 | SILICONE | |
|---|---|---|
| Advanced Ozone Resistance Tested to… | 70 hr @ 500 pphm | 70 hr @ 500 pphm |
| High Temperature Resistance Tested to… Intermittent | +135ºC (+275ºF) | 260ºC (+500ºF) |
| High Temperature Resistance Tested to… Continuous | +100ºC (+212ºF) | +225ºC (+500ºF) |
| Low Temperature Resistance Tested to… | -55ºC (-65ºF) | -74ºC (-100ºF) |
| Tensile Set Maximum… | 10MPa (1450psi) | 5MPa (700psi) |
| Compression Set Maximum… | 25% | 50% |
A round base pipe flashing designed to be customized to the exact pipe diameter using stainless steel teeth to grip the material and conform to any metal roof configuration.
