ST® Rivet
Open-end blind rivet is designed to attach 2 thin pieces of metal for a low profile appearance.
Applications include metal roofing ridge-caps, roof gutters & downspouts.
304 Stainless Steel, Carbon Steel, & Aluminum are available.
Painted #43 Stainless are available to match most architectural panel colors.
Color chart available upon request.
| SIZE | CARTON QTY. | WEIGHT/M |
|---|---|---|
| SSD43** | 1000 | 3.0 |
| SD42* | 1000 | 2.9 |
| SD44* | 1000 | 3.3 |
| AD42* | 1000 | 1.1 |
| AD44* | 1000 | 1.3 |
| AD46* | 1000 | 1.4 |
| AD66* | 1000 | 3.4 |
| SSD42* | 1000 | 2.9 |
| DIMENSIONS | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| RIVET SERIES NO. | NOM. RIVET SIZE | D | H | W | F | E | |||
| BODY DIAMETER | HEAD DIAMETER | MANDREL DIAMETER | BLIND SIDE PROJ. | HEAD HEIGHT | |||||
| MAX. | MIN. | MAX. | MIN. | ||||||
| 4 | 1/8″ | .128 | .122 | .262 | .207 | .076 | L+.120 | .040 | |
| 5 | 5/32″ | .159 | .153 | .328 | .238 | .095 | L+.140 | .050 | |
| 6 | 3/16″ | .191 | .183 | .394 | .356 | .114 | L+.160 | .060 | |
| APPLICATION DATA | S = Steel Body/Mandrel; A = Aluminum Body/Mandrel; SS = Stainless Steel Body/Mandrel | ||||||
|---|---|---|---|---|---|---|---|
| RIVET SERIES NO. | NOM. RIVET SIZE | RECOMMENDED DRILL SIZE | RIVET NO. | MATERIAL REFERENCE | GRIP RANGE (T) | BODY LENGTH (L) | |
| MAX. | MIN. | ||||||
| 4 | 1/8″ | #30 (.129) | 42 | S, A | .063 | .125 | .275 |
| 4 | 1/8″ | #30 (.129) | 43 | SS | .126 | .187 | .337 |
| 4 | 1/8″ | #30 (.129) | 44 | S, A, SS | .188 | .250 | .400 |
| 4 | 1/8″ | #30 (.129) | 46 | S | .313 | .375 | .525 |
| 5 | 5/32″ | #20 (.161) | 52 | .020 | .125 | .300 | |
| 5 | 5/32″ | #20 (.161) | 53 | S, A | .126 | .187 | .362 |
| 5 | 5/32″ | #20 (.161) | 54 | .188 | .250 | .425 | |
| 5 | 5/32″ | #20 (.161) | 56 | .313 | .375 | .550 | |
| 6 | 3/16″ | #11 (.191) | 66 | SS, A | .251 | .375 | .575 |
| MECHANICAL PROPERTIES | |||||||
|---|---|---|---|---|---|---|---|
| RIVET SERIES NO. | GRADE DESIGNATION | RIVET BODY MATERIAL | MANDREL MATERIAL | ULTIMATE SHEAR (LBS. MIN.) | ULTIMATE TENSILE (LBS. MIN.) | PULL-OUT IN 18 GA. MIN. (ACTUAL TESTED TENSILE STRENGTH) | |
| 4 | 10 | Aluminum | Aluminum | 120 | 150 | 189 LBS. | |
| 4 | 30 | Steel | Steel | 260 | 310 | 437 LBS. | |
| 4 | 51 | Stainless Steel | Stainless Steel | 420 | 530 | 643 LBS. | |
| 5 | 10 | Aluminum | Aluminum | 190 | 230 | 254 LBS. | |
| 5 | 30 | Steel | Steel | 370 | 470 | 491 LBS. | |
| 5 | 51 | Stainless Steel | Stainless Steel | 650 | 820 | 886 LBS. | |
| 6 | 10 | Aluminum | Aluminum | 260 | 320 | 471 LBS. | |
| 6 | 30 | Steel | Steel | 540 | 680 | ||
| 6 | 51 | Stainless Steel | Stainless Steel | 950 | 1200 | 1570 LBS | |
Open-end blind rivet designed to attach two thin pieces of metal with a low profile appearance.
NOTES:
- Tensile and shear data tabulated represents minimum ultimate required values as tabulated in IFI – 114 standard for break mandrel blind rivets.
- Only ST Fastening Systems standard rivets are shown on this document. Contact ST Fastening Systems for values for rivets of other sizes and material types.
