RoofjackSQ™
Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.
Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.
RoofjackSQ are well marked so they can easily be cut with shears to fit exactly the pipe size used.
RoofjackSQ are available in Black or Gray EPDM & Red Silicone.
RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.
| PIPE SIZE | BASE WIDTH | COLOR MATERIAL | CARTON QTY. | WEIGHT PER CARTON | |
|---|---|---|---|---|---|
| MINI | 1/8″ – 3/4″ | 2-1/4″ (57mm) | Black/Gray EPDM & Red/Gray Silicone | 15 | 2.5 |
| #1 | 1/4″ – 2-3/4″ | 4-1/2″ (114mm) | Black/Gray EPDM & Red/Gray Silicone | 15 | 2.5 |
| #2 | 7/8″ – 4″ | 6″ (152mm) | Black/Gray EPDM & Red/Gray Silicone | 15 | 4.5 |
| #3 | 1/4″ – 5-3/4″ | 8″ (203mm) | Black/Gray EPDM & Red/Gray Silicone | 15 | 7.5 |
| #4 | 2-3/4″ – 7″ | 10″ (254mm) | Black/Gray EPDM & Red/Gray Silicone | 10 | 8.0 |
| #5 | 4″ – 8-1/4″ | 11″ (279mm) | Black/Gray EPDM & Red/Gray Silicone | 10 | 9.5 |
| #6 | 4-3/4″ – 10″ | 12″ (304mm) | Black/Gray EPDM & Red/Gray Silicone | 10 | 12.0 |
| #7 | 5-1/2″ – 11-1/2″ | 14″ (355mm) | Black/Gray EPDM & Red/Gray Silicone | 10 | 15.5 |
| #8 | 6-3/4″ – 13-1/2″ | 17″ (31mm) | Black/Gray EPDM & Red/Gray Silicone | 5 | 12.8 |
| #9 | 9-1/2″ – 20-1/2″ | 255″ (635mm) | Black/Gray EPDM & Red/Gray Silicone | 5 | 19.3 |
| MAXI | 12″ – 28-1/2″ | 34″ (863mm) | Black/Gray EPDM & Red/Gray Silicone | 5 | 25.6 |
| EPDM 500 | SILICONE | |
|---|---|---|
| Advanced Ozone Resistance Tested to… | 70 hr @ 500 pphm | 70 hr @ 500 pphm |
| High Temperature Resistance Tested to… Intermittent | +135ºC (+275ºF) | 260ºC (+500ºF) |
| High Temperature Resistance Tested to… Continuous | +100ºC (+212ºF) | +225ºC (+500ºF) |
| Low Temperature Resistance Tested to… | -55ºC (-65ºF) | -74ºC (-100ºF) |
| Tensile Set Maximum… | 10MPa (1450psi) | 5MPa (700psi) |
| Compression Set Maximum… | 25% | 50% |
A square base pipe flashinig designed to be customized to the exact pipe diameter and conform to any metal roof configuration.
