| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| 8-18 X 1/2″ | 1/4″ HWH | 10000 | 3.6 |
| 8-18 x 5/6″ w/ Nibbs | 1/4″ HWH | 10000 | 4.0 |
| 10-16 x 5/8″ | 5/16″ HWH | 5000 | 5.7 |
| 10-16 x 3/4″ | 5/16″ HWH | 2500 | 6.3 |
| 10-16 x 1″ | 5/16″ HWH | 2500 | 7.6 |
| 12-14 x 3/4″ | 5/16″ HWH | 2500 | 8.4 |
| 12-14 x 1″ | 5/16″ HWH | 2500 | 10.0 |
| 12-14 x 1-1/4″ | 5/16″ HWH | 2500 | 11.8 |
| 12-14 x 1-1/2″ | 5/16″ HWH | 2000 | 13.3 |
| 12-14 x 2″ | 5/16″ HWH | 1500 | 16.7 |
| 12-14 x 2-1/2″ | 5/16″ HWH | 1500 | 21.4 |
| 12-14 x 3″ | 5/16″ HWH | 1000 | 25.0 |
| 1/4-14 x 3/4″ STITCH | 5/16″ HWH | 2500 | 8.8 |
| 1/4-14 x 3/4″ | 3/8″ HWH | 2500 | 12.5 |
| 1/4-14 x 1″ | 3/8″ HWH | 2500 | 15.2 |
| 1/4-14 x 1-1/4″ | 3/8″ HWH | 2000 | 17.5 |
| 1/4-14 x 1-1/2″ | 3/8″ HWH | 1500 | 19.6 |
| 1/4-14 x 2″ | 3/8″ HWH | 1000 | 23.8 |
| 1/4-14 x 2-1/2″ | 3/8″ HWH | 1000 | 30.0 |
| 1/4-14 x 3″ | 3/8″ HWH | 1000 | 33.2 |
| 1/4-14 x 4″ | 3/8″ HWH | 500 | 41.9 |
| 1/4-14 x 5″ | 3/8″ HWH | 500 | 50.7 |
| 1/4-14 x 6″ | 3/8″ HWH | 5250 | 53.0 |
| DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|---|
| #1/4-14 (3/8″ AF) | .216/.210 | .246/.240 | .192/.185 | .520/.480 | NOM .375″ | 3687 LBS | 150 IN-LBS. | 2682 LBS |
| #12-14 (5/16″ AF) | .180/.175 | .215/.209 | .164/.157 | .462/.398 | NOM .312″ | 2900 LBS | 92 IN-LBS. | 1962 LBS. |
| #1/4-14 (5/16″ AF) | .156/.150 | .245/.240 | .192/.185 | .432/.398 | NOM .312″ | 3697 LBS | 150 IN-LBS. | 2682 LBS. |
| MATERIAL | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HRS PRIMED ONLY | AZ55 GALVALUME | G-90 GALVALUME | HRS. PLATE | |||||||||||
| NOM GAUGE | 16 | 14 | 12 | 26 | 24 | 22 | 18 | 20 | 18 | 16 | 14 | 12 | 3/16″ | 1/4″ |
| THICKNESS | .060 | .075 | .105 | .018 | .024 | .030 | .048 | .036 | .048 | .060 | .075 | .105 | .187 | .250 |
| #14-14 (3/16″ AF) | 986 | 1070 | 2003 | 342 | 418 | 486 | 1038 | 620 | 868 | 890 | 1107 | 1327 | N/A | N/A |
| #12-14 (5/16″ AF) | 927 | 958 | 1678 | N/A | N/A | N/A | N/A | N/A | 729 | 787 | 1041 | 1372 | N/A | N/A |
| #14-14 (5/16″ AF) | 986 | 1070 | 2003 | 342 | 418 | 486 | 1038 | 620 | 868 | 890 | 1107 | 1372 | N/A | N/A |
| DESIGNATION | MATERIALS | ||||||
|---|---|---|---|---|---|---|---|
| AZ55 GALVANIZED | G90 | ALUMINUM | SLOT EDGE PANEL | ||||
| NOM. GAUGE | 29 | 26 | 24 | 22 | 20 | 21 | 29 |
| THICKNESS | .014 | .018 | .024 | .030 | .036 | .028 | .014 |
| #14-14 (3/8″ AF) Bonded Washer (16mm) | N/A | 1001 | 1206 | 1649 | N/A | N/A | N/A |
| #12-14 (5/16″ AF) Bonded Washer (14mm) | N/A | 760 | 1078 | 1355 | 1608 | N/A | N/A |
| #14-14 (5/16″ AF) Stitch Bonded Washer (14mm) | N/A | 892 | 1076 | 1243 | 1916 | N/A | N/A |
Metal to metal fastener designed to be a self-drilling screw used in general construction applications.
NOTES:
- 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETING
- 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.
- BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING.
- ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN LBS. APPLY AN APPROPRIATE SAFETY FACTOR TO OBTAIN DESIGN LIMITS.
#10 AND 1/4″ HWH ARE AVAILABLE WITH OR WITHOUT A BONDED SEALING WASHER. THE #12 HWHW IS AVAILABLE ONLY WITHOUT A SEALING WASHER. THE #12 MAXX STEELBINDER FASTENER IS AVAILABLE FOR APPLICATIONS REQUIRING A WASHER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.
