Metal To Metal
ST Clip Screws
A self-drilling Pancake Head is available to attach standing seam roof clips to steel framing.
Low profile head design provides excellent pull over strength.
Ruspert® corrosion resistant coating is standard on all Clip Screws.
| SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
|---|---|---|---|
| 10 x 1″ SD Carbon STL. | #2 Square/Phillips Combo | 3000 | 7.0 |
| 10 x 1-1/2″ SD Carbon STL. | #2 Square/Phillips Combo | 2500 | 9.0 |
| POINT DIAMETER | MAJOR DIAMETER | MINOR DIAMETER | HEAD DIAMETER | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
|---|---|---|---|---|---|---|---|
| #10-16 Pancake SD | .151/.156 | .189/.183 | .135/.141 | .443/.423 | 1920 | 61 IN-LBS. | 1633 LBS. |
| SUBSTRATE | |||||
|---|---|---|---|---|---|
| HRS PRIMED ONLY | G-90 GALVANIZED | ||||
| 16 | 14 | 12 | 18 | 20 | |
| #10-16 Pancake SD | 830 | 1006 | 1495 | 731 | |
| MATERIAL | |||||||
|---|---|---|---|---|---|---|---|
| DESIGNATION | AZ55 GALVALUME | ||||||
| NOM. GAUGE | 29 | 26 | 24 | 22 | |||
| THICKNESS | .015 | .019 | .024 | .032 | |||
| #10-16 Pancake SD | 529 | 779 | 1128 | 1512 | |||
Metal to metal fastener with a pancake head designed to attach standing seam roof clips to steel framing.
NOTES:
- 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETING
- 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.
- BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING.
- ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN LBS. APPLY AN APPROPRIATE SAFETY FACTOR TO OBTAIN DESIGN LIMITS.
