Fix-A-Flash™ Roofjack SQ™
Designed for an over-sized hole, but smaller diameter pipe, over which a standard ROOFJACK™ will not fit.
Manufactured from EPDM or silicone rubber, the FIX-A-FLASH material compound is designed for maximum resistance to ozone, UV light, & temperature extremes.
Each FIX-A-FLASH is well marked with pipe sizes, so it can be easily cut to properly conform to the pipe size used.
FIX-A-FLASH have a flexible aluminum band that will conform to any metal roof configuration.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.
| PIPE SIZE | BASE DIAMETER | COLOR MATERIAL | CARTON QUANTITY | WEIGHT PER CARTON |
|---|---|---|---|---|
| Closed Top
0″-15″ (0-381mm) |
19-1/2″ (495mm)
Base |
Black/Gray EPDM & Red Silicone | 5 | 15 |
| Open Top
6-3/4″-15″ (171-381mm) |
19-1/2″ (495mm)
Base |
Black/Gray EPDM & Red Silicone | 5 | 15 |
*Current sizes available with powder coating
| EPDM 500 | SILICONE | |
|---|---|---|
| Advanced Ozone Resistance Tested to… | 70 hr @500 pphm |
70 hr @ 500 pphm |
| High Temperature Resistance Tested to Intermittent Continuous |
+135ºC (+275ºF) +100ºC (+212ºF) |
+260ºC (+500ºF) +225ºC (+500ºF) |
| Low Temperature Resistance tested to… |
-55ºC (-65ºF) | -74ºC (-100ºF) |
| Tensile Set Maximum… Compression Set Maximum… |
10MPa (1450psi) 25% |
5MPa (700psi) 50% |
