ZXL™ Tapping WoodBinder®
Lifetime 40 Year Warranty Long Life Fastener.
The ZXL is proudly molded in the USA.
Type A fasteners are designed for use in wood framed buildings.
Fasteners are also used in retrofit applications in which existing screws have stripped/backed out & need to be replaced with a larger diameter.
5/16” Cupped HWH ZAMAC Zinc-Aluminum Alloy provides lifetime protection against red rust on the head & washer face. A written warranty is available upon request.
The head & washer face captures the rubber EPDM washer even when driven at an angle & are designed to maximize Pull over strength.
SIZE | HEAD STYLE | CARTON QTY. | WEIGHT/M |
---|---|---|---|
14-10 x 1-1/2″ A | 5/16″ CHWH | 1500 | 23.0 |
*Current sizes available with powder coating
DRILL POINT (DIA) | MAJOR DIAMETER | MINOR DIAMETER | WASHER/HEAD DIAMETER | HEAD ACROSS FLATS | ULT. TENSILE STRENGTH | MIN. TORSIONAL STRENGTH | NOM. SHEAR STRENGTH | |
---|---|---|---|---|---|---|---|---|
#14-10 | 30º Sharp Point | .254/.248 | .185/.178 | .630 | NOM .312″ | 1525** LBS | 125 IN-LBS. | 2997 LBS |
SUBSTRATE | (1) – 1″ PENETRATION (2) – 1 1/2″ PENETRATION |
(3) – FULL PENETRATION (4) – 1/2″ PENETRATION |
|||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MATERIAL | |||||||||||||||||
HRS PRIMED ONLY | 3/4″ PLY | 5/8″ PLY | 1/2″ PLY | 7/16″ OSB | 2X Y. PINE | 2X SPF | |||||||||||
NOM.GAUGE | 16 | 14 | 12 | ||||||||||||||
THICKNESS | .060 | .075 | .105 | (3) | (4) | (3) | (4) | (3) | (4) | (3) | (4) | (1) | (2) | (4) | (1) | (2) | (4) |
#14-10 | 1181 | 1265 | 1525** | 707 | N/A | 554 | N/A | 391 | N/A | 238 | N/A | 828 | 1525** | N/A | 594 | 1235 | N/A |
DESIGNATION | MATERIALS | ||||||
---|---|---|---|---|---|---|---|
AZ55 GALVANIZED | G90 | ALUMINUM | SLOT EDGE PANEL | ||||
NOM. GAUGE | 29 | 26 | 24 | 22 | 20 | 21 | 29 |
THICKNESS | .014 | .018 | .024 | .030 | .036 | .028 | .014 |
#14-10 (EPOM WASHER ONLY) | 886 | 1287 | 1525** | 1525** | N/A | N/A | N/A |
NOTES:
- HRS* (Hot Rolled Steel)
- Pull over values calculated with EPDM rubber washer assembled to cupped head screw with .630” washer face.
- All strength values shown are ultimate values, express in LBS. Apply an appropriate safety factor to obtain design limits .
- ** Ultimate tensile strength value calculated at the point whree the ZXL head breaks from the carbon steel body.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.
5/16” Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy, The head is molded. It is not a cap. The molded head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold.
Head and washer face carry a 40 year warranty against red rust.
ZXL is proudly molded in the USA.